NEW DENTAL MEDICAL HYGIENIST PORTABLE HIGH SUCTION VACUUM UNIT PUMP / TUBING

• Popularity - 37065 views, 5295.0 views per day, 7 days on eBay. Super high amount of views. 561 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

BRAND NEW, FACTORY-SEALED<br>Heavy Duty, ideal for institutional use<br>Lightweight, powerful, dependable and easy to maintain<br>Motor operates at a quiet < 58 dBA<br>Includes hydrophobic filter, 800cc debris/waste bottle & tubing<br>Maximum Vacuum of 560 mmHG<br>Includes built-in handle & co<br>mpact design is great for travel<br>1 YEAR MANUFACTURER'S WARRANTY<br>COMES WITH TUBING COMPLETE READY TO USE<br>PR, HI, AK WILL NEED TO PAY MORE FOR SHIPPING A QOUTE WILL BE SENT TO YOU AFTER THE PURCHASE OR EMAIL FOR A QOUTE<br>Tech Info<br>Dimensions: L 375 x W 175 x H 250 mm<br>Weight 5.5 Kg (12.1 lb)<br>Maximum Vacuum 560 +/- 3% mmHG<br>Flow Range > 40 LPM<br>Sound Level < 58 dBA<br>Electrical Requirements AC 115v 60Hz<br>Power Consumption 70 watts<br>Bacterial Filter pore size ~ 0.45 microns<br>Collection Bottle Capacity 800cc (ml)<br>Operating Temperature 32 ~ 104 F (0 ~ 40 C)<br>Operating Humidity 95% RH<br>Operating Atmospheric Pressure 10.2~15.4 psi (70~106 kpa)<br>Storage Temperature 14 ~ 158 F (-10 ~ 70 C)<br>Storage Humidity 0 - 95%<br>Storage Atmospheric Pressure 7.3 ~ 15.4 psi (50 ~ 106 kpa)<br>Fuse Specification Miniature Glass Fuse 5x20mm, Fast Blow (Quick Acting), F2A/250 V<br>CUSTOMER WILL PAY FOR THE SHIPPING BOTH WAYS ON ANY RETURNS THANK YOU<br>Product Set-Up<br>Connect either end of the connecting tubing to the top of the collection bottle connector, then connect the other end to the bacteria filter.<br>Connect the patient tubing to the collection bottle at the outlet labeled (patient).<br>Please ensure that all connections are secure and without leaks before using.<br>Product Operation<br>Before use, check the specification label on the side of the suction unit to ensure that the voltage and current indicated on the unit correspond with the voltage and current available. Make sure the power switch located on the side of the unit is in the "Off" position before connecting the unit to a power source.<br>Switch the power switch to the "I" position (on); to start the unit.<br>Adjust the vacuum level from 0 to 56 mmHg by turning the vacuum adjust knob (clockwise to increase vacuum and counter-clockwise to decrease vacuum). Watch the vacuum gauge while setting the desired level of vacuum. To accurately read the gauge, block the patient end of the hose or cap off the collection bottle and allow the gauge to reach a stable vacuum reading.<br>Place the patient tubing to the appropriate position on the patient and start to suck sputum.<br>When the sputum reaches the safe full level of the collection bottle (800cc), the suctioning will stop sucking automatically (float shut-off).<br>Switch the power switch to "O" position (off), shut off the suction motor.<br>Remove the sputum from the collection bottle after the motor stops turning completely.<br>Turn on the unit and start to run the suction unit again.<br>If the unit sustains a severe drop, check the validity of the gauge.<br>Inspect if the float shut-off is still functioning properly when the liquid in the collection bottle reaches the safe full level.<br>Always transport the unit with the vacuum adjust knob rotated fully clockwise to help prevent damage.<br>Cautions<br>When automatic float shut-off is activated, contents of the collection bottles should be emptied. Further suctioning could cause damage to the vacuum pump.<br>Should fluid be aspirated back into the unit, send your suction to an authorized service center<br>for a detailed inspection as the vacuum pump may have been damaged.<br>Clean Collection Bottle:<br>Turn off the suction unit and allow the vacuum to drop, then disconnect the AC power source.<br>With the collection bottle still in the holder, remove the collection bottle lid. The bottle can now be taken out of the holder to be emptied.<br>Collection bottle should be emptied after each use.<br>Collection bottle should be thoroughly cleaned after each use by one of the following three methods:<br>a. Wash in a hot water/dishwashing detergent solution and rinse with clean, hot tap water. Then wash in one part vinegar to three parts hot water solution. Rinse with hot tap water and air dry.<