Cart

Your Shopping Cart is empty.

Continue Shopping

Pella 305013 Storm Door 2-Bolt Mortise Lock, Choose Color

$26.39  $15.83

Up To 50% Off,30-Day Returns
Add to Wish
  • All returns accepted: Returns Accepted
  • Brand: Pella / Larson
  • Condition: New
  • Item must be returned within: 30 Days
  • MPN: 3324-
  • Refund will be given as: Money Back
  • Restocking Fee: No
  • Return shipping will be paid by: Buyer
  • Type: Storm Door
  • 1000 Units in Stock
  • Location:Kansas City, Missouri
  • Ships to:Worldwide
  • Condition:New
  • heart Popularity - 61194 views, 8742.0 views per day, 7 days on eBay. Super high amount of views. 1919 sold.
  • usd Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
  • star Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.
Pella 2 Point Bolt Mortise Lock Body, Storm Door - Choose Color<br>Pella 2 point bolt lock for Storm door.<br>Bolts are 2-1/2 inches apart<br>Bolts throw 3/8 inches<br>Overall faceplate length:<br>8-1/2 inches<br>Installation Screw holes:<br>7-5/16<br>( screws not included)<br>Available Colors: See image above for visual reference.<br>Black<br>Green<br>Cranberry<br>Brown<br>Putty<br>Tan<br>Almond (Polar White)<br>White<br>Note: These come from the factory in bulk, Colored faceplates may have minor blemishes, which is normal.<br>Lock Removal:<br>There are 4 spring loaded tabs that hold the Mortise lock in the storm door, even when faceplate screws are removed.<br>Use small pry bar or stiff putty knife and the spring loaded tabs will retract when removing lock body<br>Put a piece of cardboard between screwdriver and door to prevent marring or chipping paint<br>Cylinder Removal:<br>The cylinder screw needs to be removed to take the keyed cylinder out of door.<br>The cylinder has a cam in the center that rotates to lock and unlock the door<br>The cylinder only comes out when the cam is in the proper position.<br>To Remove cylinder turn thumb turn slowly and pull, when the cam is in alignment the cylinder will come out.<br>Replacement cylinder must be made by Pella. Their cylinder knob/key turns 270 degrees before the cam starts to turn.<br>